Install NRG steering wheel: detailed steps, DIY can also be done

Car owners always like to make changes to their cars to add a personalized style. And installing a cool steering wheel is undoubtedly the most common modification. Today, we will introduce how to install Running controller.

What is NRG steering wheel?

NRG steering wheel is a high-quality steering wheel, which is widely loved by car owners due to its cool appearance and reliable quality. Installing an Running controller does not require much professional knowledge, as long as you master the correct steps, DIY can also be done. Next, let's introduce the steps of installing NRG steering wheel in detail.

Steps to Install NRG Steering Wheel

• Step 1: Preparation. First of all, you need to prepare some tools, including wrenches, screwdrivers, nuts and so on. In addition, you also need to confirm whether the Running controller you purchased is suitable for your car model, and whether the installation diameter of the steering wheel matches your vehicle. Finally, you need to make sure that you have enough space to install the steering wheel, and that the steering wheel does not touch other interior parts of the car, such as doors, dashboard, etc.

• Step 2: Remove the original steering wheel. Removing the original steering wheel is the first step in installing the NRG steering wheel. You need to remove the nuts on the steering wheel first, then the screws on the steering wheel shaft, and finally the connector on the steering wheel shaft. During disassembly, you need to take care to retain the original nuts and connectors.

• Step 3: Install the adapter. Install the NRG steering wheel adapter on the steering wheel axle. You need to unscrew the adapter first, then place the adapter on the steering wheel shaft, and finally tighten the adapter screw. Before you tighten the screws, you'll want to make sure the connector on the adapter is properly aligned with the connector on the steering wheel axle.

• Step 4: Install the steering wheel. Install the Running controller on the adapter. You need to unscrew the nut on the steering wheel first, then align the connector on the steering wheel shaft with the connector on the adapter, and finally fix the steering wheel to the base on the adapter. In the process of fixing the steering wheel, you need to ensure that the steering wheel is firmly connected to the adapter.

• Step 5: Connect the wires. Connect the wires from the vehicle to the NRG steering wheel. You need to find the wire connector first and connect it to the connector on the NRG steering wheel. In the process of connecting the wires, you need to make sure the connectors are properly aligned and the plugs are tight.

• Step Six: Test the steering wheel. After completing the above steps, you need to test whether the steering wheel is working properly. You need to start the vehicle first, then try to turn the steering wheel to ensure that the steering wheel turns smoothly and smoothly; then try to press the buttons on the steering wheel to ensure that the buttons are functioning normally.

Summarize

Installing an Running controller does not require much professional knowledge, as long as you follow the correct steps, DIY can also be done. During installation, you'll want to take care to retain the original nuts and connectors so they can be replaced if needed. In addition, after you install the NRG steering wheel, you need to make certain adjustments and tests to ensure the normal use and safety of the steering wheel. You should also pay attention to the maintenance and cleaning of the steering wheel to avoid damage or failure. The most important thing is to obey the traffic rules and drive safely when using it to protect the safety of life and property of yourself and others.